DEVIreg™ Plug-in
DEVIreg™ Plug-in is an electronic thermostat to be installed in indoor directly to a socket. Plug in design make it easy to install and connect ready-made cables with Schuko plug like DEVIpipeheat 10 V2 or V3. Used primarily for controlling a lower temperature range as by frost protection. A wire sensor must be used to measure and control the desired temperature.
Benefits
- Plug in and go
- ON/Off switch
- LED indicator
- Low temperature area
Specification
|
Nominal voltage |
220 V- 240V~ 50/60 Hz |
|
Relay: |
16A / 3680W @ 230V |
|
Compatible sensors |
NTC 10 kΩ @ 25 °C, 3 m |
|
Hysteresis |
± 0,5 °C |
|
Temperature range |
+3 °C to +15 °C |
|
Ambient temperature |
Max: 1 x 4 mm2 or 2 x 2.5 mm2 |
|
Controller type |
1 B |
|
Storage temperature and conditions |
-25°C to 60°C, 90% RH non-condensing |
|
IP Class |
20 |
|
Controller type |
1 B |
|
Protection class |
Class II - |
|
Dimensions (H/W/D): |
70 x 41,5 x 140 mm |
|
Weight, net |
270 g |
Warranty scope
Compliance
Standard compliance:EN/IEC 60730-1 (general) • EN/IEC 60730-2-9 (thermostat)
Product variants
Choose a product variant to go for product page on Danfoss Store, where you can find more details and documents
|
Item no |
Product name |
Type |
|---|---|---|
|
140F1134 |
DEVIregTM Plug-In |
Temp. range. +3 °C to +15 °C incl. wire sensor |