DEVIreg™ 610
The DEVIreg™ 610 is an electronic IP44, 10 Amps thermostat, suitable for many different purposes both indoor and outdoor applications. It is provided with a 2-pole switch and a wire sensor to control the desired temperature. The thermostat has a button for adjusting the temperature setting with a scale from -10 °C to +50 °C, and a LED indicating the current mode (heating, standby or fault). It is water resistant and can be mounted on any plain surface indoor or outdoor.
Benefits
- ON/OFF switch
- Terminals for NO/NC connection
- LED indicator
- Mounts directly onto plain surfaces
- Low energy consumption
- IP44
Specification
|
Operation voltage |
220 V - 240 V, 50/60 Hz |
|
Standby power consumption |
max. 0,93 W |
|
Relay: |
Max 10 A (2300 W) @ 230V |
|
Sensing unit |
NTC 15 kOhm at 25 °C |
|
Hysteresis |
± 0,2 °C |
|
Ambient temperature |
-30 °C to +55 °C |
|
Temperature range |
-10 °C to +50 °C |
|
Cable specification max |
1 x 4 mm2 or 2 x 2,5 mm2 |
|
Ball pressure test temperature |
75°C |
|
Pollution degree |
2 (domestic use) |
|
Controller type |
1 C |
|
Storage temperature |
-20 °C to +65 °C |
|
IP class |
IP 44 |
|
Protection class |
Class II - |
|
Dimensions (H/W/D) |
100 mm x 69,5 mm x 45 mm |
|
Weight |
165 g |
Warranty scope
Compliance
Standard compliance: • EN/IEC 60730-1 (general) • EN/IEC 60730-2-9 (thermostat)
Product variants
Choose a product variant to go for product page on Danfoss Store, where you can find more details and documents
Table
|
Item no |
Product name |
Temperature range |
|---|---|---|
|
DEVIregTM 610 |
Temp. range -10 °C/+50 °C incl. wire sensors |