GLOBAL

DTCE 100T

DTCE 100T is a 360° screened twin conductor electric underfloor heating mat designed for installation in concrete floors. The heating cable features a round profile and a UV-stable outer sheath, supporting straightforward installation where the cable is embedded in concrete.
 
The heating mat is designed for indoor floor heating applications and must be installed on insulation and covered with a minimum of 50 mm concrete. It must be used together with a suitable thermostat to help prevent overheating and support controlled energy use.
 
A solid-conductor cold lead provides a visible and practical connection point, supporting efficient installation. Each cable undergoes testing for Ohmic resistance, high voltage, and material compliance as part of the manufacturing quality control process.
 
DTCE 100T is covered by the DEVIwarranty™. Warranty terms and conditions apply.
 
Important: DTCE heating mats are not approved for roof installations because the fixing tape is not UV-stable.
 
The DTCE cable range has an Environmental Product Declaration (EPD). An EPD provides independently verified information about the environmental impacts of a product throughout defined life cycle stages.
DTCE 100T

Benefits

  • Supports straightforward installation
  • Robust cable construction
  • Suitable for concrete floor applications
  • Screened cable design
  • UV-stable outer sheath
  • Quality-controlled manufacturing process

Specification

Nominal voltage

230 V~

Construction

Round, twin conductor with 360° screening, one cold lead

Output

100 W/m2 @ 230 V~

Max. permissible use temperature, powered

75 °C

Max. permissible use temperature, unpowered

90 °C

Cable thickness

7 mm

Deformation strength

1500 N

Pulling strength

450 N

Conductor insulation

FEP

Outer sheath

UV protected PVC

Screen

0.5 mm2 Cu, 100% Alu-foil

Cold lead

6 m DTCL, 3G 1,5mm2

Min. installation temperature

-5 °C

Bending Ø, min.

5 cm

IP Class

IPX7

Warranty scope

20 years

Compliance

Standard compliance: • IEC60800:2009

Compliance

Product variants

Choose a product variant to go for product page on Danfoss Store, where you can find more details and documents

Types: set DTCE 100T

      

Item no.

Heated area

Dimensions (W x L)

Output @ 230V~

Resistance

Cold lead

83901900

2,25 m2

0,75 m x 3,0 m

235 W

225,1 Ω

3 x 1,5 mm2

83901903

3,60 m2

0,75 m x 4,8 m

350 W

151,1 Ω

3 x 1,5 mm2

83901906

4,80 m2

0,75 m x 6,4 m

465 W

113,8 Ω

3 x 1,5 mm2

83901909

6,00 m2

0,75 m x 8,0 m

580 W

91,2 Ω

3 x 1,5 mm2

83901912

8,60 m2

0,75 m x 11,4 m

840 W

63,0 Ω

3 x 1,5 mm2

83901915

10,50 m2

0,75 m x 14,0 m

1115 W

47,4 Ω

3 x 1,5 mm2

83901918

12,00 m2

0,75 m x 16,0 m

1200 W

44,1 Ω

3 x 1,5 mm2

Documents