DEVIreg™ Plug-in
DEVIreg™ Plug-in is an electronic thermostat to be installed in indoor directly to a socket. Plug in design make it easy to install and connect ready-made cables with Schuko plug like DEVIpipeheat 10 V2 or V3. Used primarily for controlling a lower temperature range as by frost protection. A wire sensor must be used to measure and control the desired temperature.
Benefits
- Fast and easy to install
- Multiple application options
- Safe and robust
- Long life-time
- Maximum protection
Specification
|
Nominal voltage |
220 V- 240V~ 50/60 Hz |
|
Standby power consumption, max |
0,2 W |
|
Relay: |
16A / 3680W @ 230V |
|
Compatible sensors |
NTC 15 kΩ @ 25 °C, 3 m. (default), |
|
Regulation |
PWM - Pulse Width Modulation |
|
Frost protection |
4 °C - 14 °C (default 5 °C ) |
|
Temperature range |
15 °C to 35 °C (room) |
|
Cable specification for connectors terminals |
Max: 1 x 4 mm2 or 2 x 2.5 mm2 |
|
Ball pressure test |
75 °C |
|
Pollution degree |
2 (domestic use) |
|
Software class |
A |
|
Controller type |
1 B |
|
Storage temperature and conditions |
-25 °C to 60 °C, 90% RH non-condensing |
|
Operating temperatures and conditions |
0 °C to 35 °C, 90% RH non-condensing |
|
IP class |
21 |
|
Protection class |
Class II - |
|
Immunity against voltage surges |
Over Voltage Category III |
|
Dimensions (H/W/D): |
85 mm x 85 mm x 20-24 mm |
|
Weight, net |
204 g |
|
Battery back-up time, min. |
1 hour |
Warranty scope
Compliance
Standard compliance:Radio Equipment Directive • LVD 60730-1, -2-7 and -2-9 • EMC EN 301 489 -1 and -17 • RF EN 300328
Product variants
Choose a product variant to go for product page on Danfoss Store, where you can find more details and documents
Table
|
Item no |
Product name |
Type |
|---|---|---|
|
DEVIregTM Room |
Ecodesign prog. room thermostat |